Termékek csomagküldési szolgáltatások (806)

1 frontal seal bar 400 mm, vacuum pump 20 m³/h. Also available with MAP - VACUUM PACKAGING MACHINE IN STAINLESS STEEL WITH TROLLEY Vacuum packaging machine with front sealing bar and stand on wheels, made of stainless steel (AISI 304), with digital panel and volumetric electronic sensor for the steady control of vacuum. Tank increased with concave bottom and convex cover for a working height of 230 mm in the central part. Vacuum pump 20 m³/h. It ensures a high productivity. Vacuum machines can be equipped with gas inlet system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Number of sealing bar:1 front Sealing bars length:mm 400 Vacuum pump:20 m³/h Work cycle:about 30 seconds Useful lenght:mm 420 Useful width:mm 500 Useful height (chamber + lid):mm 100/230

Vertical sealing machines for hanging garments, suitable for packaging ironed garments such as jackets, shirts and suits. They can seal all types of bags between 400 and 700 mm in width and of any thickness. The machines carry out an impulse welding (the resistances heat up only during the welding). Welding times vary from a minimum of 0.6 sec. to a maximum of 1.2 sec. The sealing machines for hanging garments are available in the following versions: FPMM MANUAL MODEL The FPMM manual model only performs the upper sealing of the bags containing the garments. The bars are closed by manual command from the operator who acts on a lever located on the control panel. The bottom of the envelope remains open. FPMA/FPMA PLUS PNEUMATIC MODEL The FPMA model is more professional and robust and has a minicomputer that manages the functionality of the machine, from the safety devices to the working times. Thanks to it, it is possible to work in three different operating mode. Seal length:mm. 600 Max. length of garments:mm. 1650 Material to use:Polyethylen film, also with gussets

La scatola più conosciuta al mondo, la scatola modello americano, utile per svariati usi legati alla spedizione delle proprie merci, una scatola economica per tutti gli usi

This kit is the easiest and most economical kit for strapping and is used especially when you do not need a battery tensioning device or larger coils. This kit is suitable for strapping of pallets up to 800 kg, considering putting two straps for each pallet. The holding capacity of strap dipends on material type and on strap choice. Max width usable strap:mm. 16 Strapping tool weight:Kg. 2,9

Place the pallets (EPAL) using a simple hand pallet truck, attach the film to the base of the pallet, select the wrapping program and press the start button.The machine automatically winding and stops. Cut the film manually. Attention: the pallet must not have the inner crosspieces on the side of the transpallet. STRETCH FILM FOR WRAPPING MACHINES: The film normally used on winding machines is 23 my standard in rolls of approximately 16 kg. With 1 roll of film you are able to wrap an average of 60 pallets. The film is also available in white 30 my, suitable to protect the contents of the pallets from sunlight. The white film is opaque and can be used to hide valuable goods during transport. The type of films supplied by us is of premium quality and is suitable to be used on our machines. We recommend using only top quality film in that it significantly reduces packaging waste and failures due to the use of an unsuitable product. Capacity:Kg. 1000 (1500 kg with optional) Turntable rotation speed:variable 4 - 7 rpm Max. pallet dimensions:mm. 1000 x 1200 Max. pallet height:mm 2200 h (2700 mm with optional) Turntable diameter:mm. 1500 Turntable height:mm. 90 Power supply:380V 50Hz. + T + N Installed electric power:Kw 0,6 Dimensions:mm. 1650x2520x2560 h Weight:Kg. 550

Pneumatic eyeletting machine with single head for eyelets 9 mm, 7 mm, type 051 a - PNEUMATIC EYELETTING MACHINE, WITH SINGLE HEAD, automatic feeder, cast-iron frame and stand. Suitable for high volume applications and where one eyelet are required. Ideal for automatic application of warranty seals in cardboard industry, bank office, post office and in many others field. It is especially used in food industry for to seal and at the same time for to apply a printed card on plastic bags. Steel painted base plate:mm 360 x 500 Usable eyelets:type 7-9-050-051

This special automatic table top/vertical with stand constant heat sealer. Are suitable for sealing polypropylene and paired / laminated bags, paper, barrier materials, etc. The sealing jaws of the type "hot bar" are equipped with resistance and thermoregulator for controlling the temperature from 30 ° C to 200 ° C. The closing of the jaws is through an electromagnet which ensures a high sealing pressure and allows the sealing of thick bags with or without side gussets. Operation The operation provides for the closure of bars and seals the bag following operator control, by electric pedal. This allows the operator to grab the bag with both hands, being able to perform a more precise sealing and parallel to the bag. The vertical model with pedestal can be tilted to 90 degrees, has a special support surface to support the bag during sealing. In this way the operator has both hands free to hold the bag since the sealing is made by pressing the pedal. seal length:mm. 300/400/600 Seal width :mm. 14 Temperature:30°÷200°C

CARTON SEALER MACHINE MOD. FP 9070 - DOUBLE DRIVE SYSTEM CONSISTS OF TWO LOWER SIDE BELTS AND TWO UPPER BELTS. Machine suitable for large boxes, the double drive system ensures a regular feed even in presence of high and light boxes. The two heads simultaneously apply a strip of tape taping above and below the box. Ideal for close fixed format boxes (with constant height and width). Structure of the body in painted steel. Movement of boxes happens via two lower dive belts and two upper drive belts, adjustments for the different formats are carried out using flywheels. The machine is equipped with idle rollers 400 mm length for loading and unloading. The machine is equipped with wheels with brake. Carton dimensions:Min 150 x 200 x 120 mm Max Unlimited x 700 x 750 mm Tape width:mm 50 (75 optional) Tape type:PP - PVC Operation speed:20 m/min Belt drive:Lower side/Upper

Sealing machine with stand and mechanical footswitch, constant heat sealing bars fot the closure of polypropylene bags and coupled in aluminum, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and temperature controller for controlling the temperature from 30 ° C to 200 ° C. The closing of the sealing bars by a mechanical pedal guarantees a high welding pressure and allows the sealing of high thickness envelopes with or without lateral bellows. Seal length:mm. 300/400 Seal width :mm. 14 Temperature:30°C.÷200° C. Sealable material:PP-AL/PE

The FPA2-PRO marker is the most professional version of inkjet markers. It allows to write up to 12,7 mm on several lines of printing, even on non-porous surfaces (boxes, bottles, glossy cards, jars, etc.). It can reach a speed of 72 m/min. It allows to print alphanumeric texts, logos, date/time, codes, counter, lot and 1D & 2D barcode, distributed on different lines with a total height of 12,7 mm. The minimum printing height is about 2,7 mm. The marking speed can be set directly on the marker keypad and it is therefore possible to write accurately and without deformation of the characters. The cartridges are very durable, have a duration of tens of thousands of markings and do not require maintenance. The marker is however equipped with an automatic nozzle cleaning system Thanks to the SD card (included in the package) you can save up to 999 messages, setting them in any size (maximum 12,7 mm) and any Word font format. Resolution:600x300 dpi based on resolution and printing speed Print engine:Hewlett-Packard Thermal Ink Jet Technology Print speed:72 m/min at 300 dpi, horizontal resolutio Maximum printing height:12,7 mm (1 row) Minimum printing height:2,7 mm (on several rows) Print distance:6 mm recommended Printable elements:alphanumeric writings, logos, date / time, codes, counter, lot and barcode

FPXBAG-NEW is an innovative semiautomatic vertical packaging machine which combines different existing technologies with unique innovations. FPXBAG-NEW is an easy to use, economical and functional form-fill-seal machine which creates 3 hermetic sealing bags starting from a plain foil roll. Compared to the other vertical machines, FPXBAG-NEW has an innovative system of forming box which allows to get a fast format change. This systems reduces the machine shot-down and we gain in productivity. Moreover the two clamps of the horizontal sealing allow to keep the forming bag in position reducing the any break possibility. The key factor of the FPXBAG-NEW is the versatility of the machine which can seal any kind of film, this thanks to the incomparable sealing system. The machine is supplied with 1 forming tube type 200 (suitable for making bags with a width of 185 mm). On request it is possible to have forming tubes with different sizes, type 200 and type 250. Hourly production:0­-1000 pz. Bags width:mm 170/185/235 (depending on collar) Bag lenght :from mm 50 to mm. 330/580 with tape Film reel width:mm 360/410/520 Max diameter film reel:mm 250 Film thickness:from 15 to 50 µm Usable film:Polyethylene, polyolefins, drilled, coupled, macro-perforated, biodegradable films, cartene Horizontal sealing:mpulse with double strip and cutting line

The woven strap is widely used when you need to tie and secure the products by means of ligatures that are not constituted by iron or plastic strap. Woven strap features: - Excellent tension maintenance. - Perfect elasticity in case of shock. - No conjunctions. - It ensures minimum wastage. - Perfect winding. For the ligation you need a tensioner, the strapping band, the buckles and a strap-holder trolley to prevent strap damage. Different types of straps, more professional strapping tools and various types of trolleys are available on request. Example model:40 WG Width:13 mm. Reel lenght:1100 mt. Diam.int.:76 mm. Linear breking load:375 Kg.

MINI PALLET TRUCK MOD. FP W380/800 WITH FORKS WIDTH MM. 380 Pallet truck with reduced dimensions, which is essential for the handling of pallets of mm. 600x400 (¼ pallet), exhibitors, speakers and generally for packages with size and height below the standard. Capacity:Kg. 500 Maximum forks height (h3):mm. 150 Minimum forks height (h13):mm. 60 Handle height (h14):mm. 1127 Overall width:mm. 380 Overall lenght (L1):mm. 1126 Forks length (L):mm. 800 Single fork width (e):mm. 100 Fork thickness (s):mm. 40 Distance between forks:mm. 180 type wheels:Polyurethane steer + single roller nylon

Pneumatic eyeletting machine with single head for eyelets 9 mm, 7 mm, type 051 a - PNEUMATIC EYELETTING MACHINE, WITH SINGLE HEAD, automatic feeder, cast-iron frame and stand. Suitable for high volume applications and where one eyelet are required. Ideal for automatic application of warranty seals in cardboard industry, bank office, post office and in many others field. It is especially used in food industry for to seal and at the same time for to apply a printed card on plastic bags. Steel painted base plate:mm. 360 x 500 Usable eyelets:type 7-9-050-051

Gas hand tool for thermo shrinking Hornet, high power (until 90 Kw), but very light and handy with practical handle with fast lever gas and electronic ignition. The high power and ease of use allow a fast shrinking of plastic films of each thickness and the realization of packaging even large. Raptor it's available with power of 70 Kw and 90 Kw. The main areas of application are: Packing : Welding / retraction of packaging also large Boating : Realisation of coverages in plastic film for boat storage Building : Welding and retraction of plastic film for protective scaffolding Environment : Welding of plastic film for coating for containment tanks Example model:FP HORNET 70 Power :70 Kw. - 238.800 btu/h Supply :propane gas Max. pressure :4 bar Consumption :5,22 Kg/h Ignition :piezoelectric

ME-CFE CONSTANT AUTO SEALERS WITH MOTOR CONTROL Table top motorized sealer with electric pedal and welding bars at a constant temperature for sealing polypropylene bags and paired/laminated aluminium, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and thermostat for controlling the temperature from 30 ° C to 250 ° C. The closure of the bars it takes place through an engine which guarantees a high welding pressure (0,7 Kg./cm2) and allows the sealing of envelopes with hight tickness with or without side bellows. Operation The operation provides for the closure of bars and seals the bag following operator control, by electric pedal. This allows the operator to grab the bag with both hands, being able to perform a more precise sealing and parallel to the bag. Seal length:mm. 300/400 Seal width :mm. 14 Temperature:80°÷250°C

Impulse sealer with mechanical pedal and floor support for the closure of bags in plastic material heat-sealable, impulse sealing (resistance to heat for a few seconds) and timer for adjustment. At the end of the sealing is possible to trim the bag with the cutter installed on the bar. The open structure also allows you to install a coil on the back of the machine and to obtain envelopes of the desired length using the tubular film. The sealing head can be tilted up to 45 ° to allow the closure of the envelopes containing liquids or powders. Maximum thickness of 0.15 mm sealable . (0.30 mm. Overall) Max. seal length:mm. 450/mm. 600 Seal width:mm.2 Thermosealing materials:PE-PP

MG 1020 SEALING MACHINE WITH CLOSING MAGNET Pulse sealers MG 1020 series, with 1020 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 1020: bench sealing machine with manual closing of the bars MGMI 1020: bench sealing machine with motorized closing of the bars and electric pedal Max. seal length:mm. 1020 Seal width:mm. 5 Max. seal thickness:0,20 mm (0.40 tot)

Pneumatic tensioner model FP LASH very powerful and easy to handle, suitable for all working conditions, guarantees a high tensile strength and it is suitable for securing bulky and heavy loads on trucks, containers, ships, etc. The high tension force (7500 N) allows the use of textile strap with width up to 50 mm. It is also possible to adjust the tension acting on the supply pressure. The holding capacity of strap depends on material type and on strap of choice. Strap width:Max 50 mm Tension:Max 7500N Weight:4,5 Kg

The semi-automatic strapping machines are ideal for tying boxes, packages, bundles, etc. in warehouses, workshops, supermarkets and anywhere there safe packing is needed. The plastic strap helps to reinforce the packaging and ensure ligation. The printed strap is also available. If placed around the packaging, the strap is a valuable burglar resistant tool, if the package is opened it can not be closed with the same type of strap. The model FP8022 allows to strap the product with minimum size of 60x60x10 mm and it uses strap with width 6-9-12 mm and with max thickness of 0,6 mm. Strap width:mm. 6- 9- 12 Strap thickness:mm. 0,5-0,6 Air pressure:6/7 bar Air consumpt:12 Lt. / sec Weight:85 Kg

Pneumatic strapping tool with vibration welding (heating by friction) for straps in polyester PET width 16-19 mm and max. thickness mm. 1,27. Compact, handy, easy to use, is suitable for closing all kinds of flat packaging. Thanks to a very short base and the command of reverse rotation of the roller it may also strap round packing with a minimum diameter of mm. 700. The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly. Strap width:from 16,0 to 19,0 mm. Strap thickness:0,80-1,27 mm. Air pressure:6 bar Air consumpt:12 Lt. / sec Weight:5,3 Kg

Semiautomatic mobile strapping machine for the strapping of pallets, complete with a channel for inserting the strap. New compact model with closed body and internal reel holder. Hinged raceway equipped with double roll to facilitate the insertion of the strap into the base of the pallet. Strapping sling channel with containment flaps (avoiding the exit of the strap). Electronic voltage regulation via potentiometer. Electronic regulation of the strap throw length. Safety function with acoustic alarm and tension delay (when the operator inserts the strap he has time to remove the hand). Strap width:mm. 12 Strap thickness:mm. 0,6 - 0,65 Reel internal diameter:mm. 200 Power supply:220 V 3 phase Weight:80 Kg

Pneumatic strapping tool with vibration welding (heating by friction) for straps in polypropylene PP and polyester PET width 13-16-19 mm and max. thickness mm. 0.9. Compact, handy, easy to use, is suitable for closing all kinds of flat packaging. Thanks to a very short base and the command of reverse rotation of the roller it may also strap round packing with a minimum diameter of mm. 700. The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly. Strap width:from 13.0 to 19.0 mm. Strap thickness:0,40-0,90 mm. Air pressure:6 bar Air consumpt:14 Lt. / sec Weight:4,9 Kg

Place the pallet on the platform and hook the stretch film to the base then press the start button. The platform begins to rotate, after 2-3 turns operate the button for coil ascent. After reaching the desired height, stop the lifting of the reel and after 2-3 turns stop the machine or operate the descent of the reel and carry out the winding up to the base of the pallet. At the end of wrapping, press the stop button and cut the film. On request we can produce wrapping machines with: Rotary table diameter mm. 1800 - 2000 Electronic scale integrated STRETCH FILM FOR WRAPPING MACHINES: The film normally used on winding machines is 23 my standard in rolls of approximately 16 kg. With 1 roll of film you are able to wrap an average of 60 pallets. The film is also available in white 30 my, suitable to protect the contents of the pallets from sunlight. The white film is opaque and can be used to hide valuable goods during transport. Maximum load:Kg. 2000 Max pallet height:mm 2200 h (2400 mm with optional) Turntable diameter:mm. 1500 Height of turntable:mm. 75

The semi-automatic strapping machines are ideal for tying boxes, packages, bundles, etc. in warehouses, workshops, supermarkets and anywhere there safe packing is needed. The plastic strap helps to reinforce the packaging and ensure ligation. The printed strap is also available. If placed around the packaging, the strap is a valuable burglar resistant tool, if the package is opened it can not be closed with the same type of strap Strap width:mm. 5 – 9 – 12 Strap thickness:mm. 0,5-0,6 Air pressure:6/7 bar Air consumpt:12 Lt. / sec Weight:100 Kg

Pneumatic tensioner model FP CORD for tensioning and cutting of polyester strap textile and composite. Equipped with high tension force (7500 N) allows the use of strap widths up to 32 mm. By acting on the supply pressure it is possible to adjust the tension. The built-in knife allows cutting the strap easily and without waste of material. The holding capacity of strap depends on material type to strap and on strap choice. Strap width:Max 32 mm Tension:Max 7500N Weight:3,8 Kg

Self-propelled battery wrapper, suitable for wrapping with stretch film pallets with a maximum height of mm. 2050, also with an irregular shape. However, the base of the pallet must have a regular shape to allow the feeler wheel to follow its shape. Rotating automatically around the pallet, it wraps with stretch film or net. Equipped with rudder for manual steering with forward-reverse buttons, maintenance-free gel traction batteries, built-in battery charger, three-phase electric motors with inverter, height-adjustable guide wheel, front safety bumper. The FP GLOBO model is equipped with a folding arm with reel holder trolley.Keyboard lock Rotation speed adjustable from 5 to 12 rpm Up/down reel carriage speed from 1.3 to 5.4 m/min Turns at the base/top of the pallet from 1 to 10 Pallet height reading delay Film tension adjustment Film pre-stretch adjustment Reel change comfort cycle CYCLES SELECTABLE FROM Weight:Kg. 300 Overall size:mm. 1280x1850x1000h

MG 300 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 300 series, with 300 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Maximum weldable thickness 0.15 mm (0.30 tot). Available models: MG 300: bench sealing machine with manual closing of the bars MGM 300: bench sealing machine with motorized bar closing and electric pedal Max. seal length:mm. 300 Seal width:mm. 3 Max. seal thickness:0,15 mm (0,30 tot)

The DSL professional inkjet marker is suitable for marking on porous surfaces (cartons, cartons). Thanks to the external ink tank, it is possible to position the marker on automatic lines and save considerably on consumables and cartridge replacement times. The cartridges contain 420 ml. The cost of printing is about 5 times lower than the other FPA2 series markers. It allows to print alphanumeric texts, logos, date / time, codes, counter, lot and 1D & 2D barcode, distributed on different lines with a total height of 12,7 mm. The minimum printing height is about 5,4 mm. The marking speed can be set directly on the marker keypad and it is therefore possible to write accurately and without deformation of the characters. The cartridges are very durable, have a duration of tens of thousands of markings and do not require maintenance. The marker is however equipped with an automatic nozzle cleaning system. Thanks to the SD card (included in the package) you can save up to 999 messages. Resolution:600x300 dpi based on resolution and printing speed Print engine:Hewlett-Packard Thermal Ink Jet Technology Print speed:72 m/min at 300 dpi, horizontal resolution Maximum printing height:12,7 mm (1 row) Minimum printing height:2,7 mm (on several lines) Print distance:6 mm recommended Printable elements:alphanumeric writings, logos, date / time, codes, counter, lot and barcode

PNEUMATIC CLIPPER FOR GABIONS Large sturdy pneumatic clipper with ring closure, using clips of 45 mm. with wire diameter 3 mm. and can close up to a diameter of 15 mm (mm. 13 for model FPPS45P-13). Suitable for the assembly of the containment gabions in mesh, structures and fencing in wire mesh, fixing reinforcements for the building, sealing bags or mattresses that are used as retaining walls, sound barriers, dikes, road reinforcements, reinforcement of banks, horticulture, traps and rockfall protections. Structure :Steel with rubber handle Charger capacity:100 rings Open ring width (outer):mm 45 Open ring height:mm 24 Opening width:mm 25 Working pressure:5-6 bar Closure internal diameter:mm 15 (mm 13 for model FPPS45P-13)